Valves
Ball valves
Ball valves are also designed to be operated fully open or fully closed with any liquid containing particles that could scratch the ball. Many people use them successfully for throttling clear water. Ball valves have low pressure drops, open and close quickly, are simple, and are trouble free. With the development of Teflon seals, ball valves have grown in popularity. Opening or closing a ball valve too quickly can cause fluid hammer.
Please contact us for Turkish manufacture information!
Butterfly valves
Butterfly valves are like ball valve with the most simple yet versatile valves. They are quarter turn operated valves which are commonly used in multiple industries for varied applications. Quarter turn operation ensures quick operating of the valve.
Please contact us for Turkish manufacture information!
Globe valves
Globe valve is a type of linear motion valves and is typically used in both on-off and throttling applications. In globe valves, the flow of the fluid through valve follows an S-path. The flow direction changes twice which results in higher pressure drops. Globe valve close slowly to prevent fluid hammer.
Please contact us for Turkish manufacture information!
Gate valves
Gate valve is a sliding type of valve. They are designed to operate fully open or fully closed. Gate valve should ideally be used as on-off valve. It is not advisable to use them as throttling valves because in partly open conditions, erosion of gate might take place. In partially open conditions, due to vibrations, valve is exposed to quick wear and tear.
Please contact us for Turkish manufacture information!
Check valves
Check valves also called as non-return valves. They design to allow the flow to pass through them in only one direction and stop the flow in reverse direction. Tight shutoff can be difficult to achieve in case back pressures are low. The valve will leak the fluid in such situations.
Please contact us for Turkish manufacture information!
Manometer Valves
Manometer valves are used fuel industry, steel industry, energy power plants, chemical and petrochemical industry applications.Manometer valves are used only controlling. Valves are opened manually when controlling required for pressure and differential pressure measurement.
Please contact us for Turkish manufacture information!
Pneumatic Controlled On-Off Valves
It is a Y-type valve as shown and using for It is used for liquid, gas and vapor sealing applications. It operates by moving a single-acting piston pneumatically operated actuator. Normally closed position. As air moves toward the actuator, the piston moves upward and the valve opens. When the air is cut off, the piston is pushed by the spring and the valve is brought into position.
Please contact us for Turkish manufacture information!
Solenoid Valves
Solenoid valves are used wherever fluid flow has to be controlled automatically. Solenoid valves are control units that, when turned on or off electrically, shut off or allow fluid. The actuator takes the form of an electromagnet. When under tension, a magnetic field is created which pulls a piston or pivoting armature against the spring action. When de-energized, the piston or pivoting armature returns to its original position by spring action.
Please contact us for Turkish manufacture information!
Safety & Relief valves
Safety valves and pressure relief valves are essential components of many industrial processes, and their proper selection and operation can significantly impact the efficiency and safety of the entire process.
The safety valve will automatically open when the pressure inside the system exceeds the set level. Similarly, a pressure relief valve is used to relieve excess pressure from the system by opening when the pressure inside the system reaches a specified level.
Please contact us for Turkish manufacture information!
Static Balance Valves
The main function of static balancing valves is to ensure adequate pressure in the piping.Such elements not only allow manual flow regulation, but are also used to take measurements and monitor the performance of the infrastructure.
Please contact us for Turkish manufacture information!
Dynamic Balance Valve
Dynamic balancing valves ensure that the flow rate will not be exceeded regardless of pressure fluctuations in the system.These valves can be used in virtually any heating or cooling based construction.Dynamic balancing solution completely independent of pressure.Another advantage of automatic balancing is reduced time and virtually no commissioning time.
Please contact us for Turkish manufacture information!
Flow Control Valves
Flow control valves are used in pneumatic systems to regulate the flow of compressed air by controlling the flow rate, and the speed of the pneumatic cylinder can also be regulated directly. Flow control valvesalso helps reduce wear through lower kinetics.Moreover, the control valves also support a more steady and thus reliable movement.
If you need detailed advice on products according to your usage needs, please contact us.
Please contact us for Turkish manufacture information!
Pressure Control Valve
Pressure control valves are designed to control the pressure inside a system and maintain it within a specified range. It operate by opening or closing a valve another mechanism to allow fluid to flow in or out of the system, depending on the pressure inside the system and helping maintain a constant pressure and prevents the system from exceeding its maximum pressure rating.
Please contact us for Turkish manufacture information!
Level Control Valve
Level control valves are automatic self-operating, driven by the inline pressure.The function of a level control valve is to control the level of a fluid in a tank by opening to admit fluid if the level drops, and closing to prevent the fluid level getting too great and overflowing the tank.
Please contact us for Turkish manufacture information!
Water Hammer Preventation Valve
Water Hammer Preventation Valveopens instantly when the pressure in the valve exceeds the safety level, thereby eliminating the network pressure.When the pressure returns to normal, the valve closes slowly, at an adjustable rate.
Please contact us for Turkish manufacture information!
Fire protection products
Fire protection products play a crucial role in preventing and mitigating the devastating effects of fires. From residential buildings to industrial facilities, these solutions are essential for safeguarding lives and property. Some key fire protection products:
Sprinklers: consist of a network of pipes with strategically placed sprinkler heads.
Fire Valves and Components: such as test & drain valves, riser manifolds, dry and wet alarm valves, flow swiths, gate vales …
Please contact us for Turkish manufacture information!
Valve accessories
Valve accessories include additional components that can be attached to valves to enhance their performance and functionality. These accessories can be used to control or enhance the performance of valves in a wide range of applications, including oil and gas, chemical processing, and water treatment…
Please contact us for Turkish manufacture information!